Angular Contact Bearing, Open, 45mm Bore ID x 100mm OD x 50mm Width, 15°, 40° C0 Internal Clearance

Angular Contact Bearing - 40 mm Bore, 90 mm OD, 46 mm Width, Open, 15 °, 40 ° Contact AngleWNR G53188

80SK19 ROLLER CHAIN SPROCKET ; 1" P 19T BORE FOR SK BUSHING
Roller Chain Sprocket; 80 Chain; 19 Teeth; 1 Row of Teeth; No Hardened Teeth; 6.593" Outside Diameter; 6.076" Pitch Diameter; B-Hub One Side; Bushed Mount; SK Bushing; 1" Chain Pitch; ANSI Roller Chain; Keyway; Steel Material

Martin Sprocket & Gear, Inc. 80SK16, QD Bushing Bore Roller Chain Sprocket, SK QD Bushing Bore, Strands: 1, Steel, Teeth: 16

Bushing Bore Roller Chain Sprocket - QD, 80 / 1 in, 12 Teeth, SH Bushing, Steel Material

80SF54, QD Bushing Bore Roller Chain Sprocket, SF QD Bushing Bore, Strands: 1, Steel, Teeth: 54, Pitch: 1"

Martin Sprocket & Gear, Inc. 80SF28, QD Bushing Bore Roller Chain Sprocket, SF QD Bushing Bore, Strands: 1, Steel, Teeth: 28

Browning (Regal Rexnord) 80SF23, QD Bushing Bore Roller Chain Sprocket, SF QD Bushing Bore, Strands: 1, Steel, Teeth: 23

Martin Sprocket & Gear, Inc. QD Bushing Bore Roller Chain Sprocket, SDS QD Bushing Bore, Strands: 1, Steel, Teeth: 14

#80 Spring Clip Connecting Link, C-4334CL-08-P

1" Pitch, ANSI 80, Single Strand Roller Chain, Duralube, Sold in Box of 10 feet. Priced per Foot.
XDL-1334-010

Offset Link #80, Cottered, Carbon Steel Material,
This part supersedes: C-7334-PC-7334-P

Bored to Size Sprocket - 80 / 1 in, Bored to Size, 1.6250 in Bore , 12 Teeth, Steel Material
80BS12 x 1-5/8

Solid B Sprocket - Bored to Size - 80 / 1 in, B Hub, 9 Teeth, 1.0000 in Stock Bore, Steel Material

3M Scotch-Brite™ Hand Pad 7447, HP-HP, A/O Very Fine, Maroon, 6 in x 9 in, 20/Carton

SKF Angular Contact Ball Bearing

Angular Contact Bearing - 50 mm Bore, 130 mm OD, 31 mm Width, Open, 40 ° Contact Angle, C0

SKF Angular Contact Ball Bearing

SKF Angular Contact Ball BearingThese single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.High-speed capabilityAccommodate relatively high radial loads and large unilateral axial loads

SKF Angular Contact Ball Bearing...WNR G53183